Let’s stay connected! Follow us on social media!
#Broom storage install#
In fact, I like to cut the shelf to length and prime and paint it before I install it. Once again, I think it’s easier to paint the cleats before the shelf is secure into position. Next find the studs in the wall and secure the cleats to the wall at each stud.įinally, fill the nail holes with putty, caulk the seams and paint. Then cut the wood for the cleats to the desired length for each wall. I first marked mine with a pencil and used a level to make sure they were the same height on each of the 3 walls. Now it’s time to install the cleats for the shelves.įirst determine the location for your shelves. Customize Broom Closet with Shelves and Hangers It just makes the entire process easier than trying to fit yourself into a small and confined area to get the job done. Then caulk the seams and fill in the nail holes with putty.Īpply one coat of primer and two coats of paint.Īs a rule I like to paint a small area like a closet before I install the shelves. Next install the door casings and baseboards. You smooth it on, let it dry, sand and repeat until you have a smooth wall finish.
#Broom storage series#
The drywall mud is applied in a series of layers. Now that the framing is complete, you are ready to install the drywall and mud the corners and screws. In addition, we purchased a pre-hung door, leveled it and secured it to the 2×4 framed walls. We placed 3 wall anchors along the stud as well as 4 wall anchors along the header boards.Īlso we were able to secure the footer section to the floor with screws. Using a screwdriver tighten the bolt until snug and secure. Then the molly or wall anchor along with a washer is placed into the hole. Therefore we will be securing our stud to the existing wall with mollies.įirst we drilled a hole into the 2×4 stud and into the wall. Usually a wall like this is secured into a stud.īut because we are adding a wall to an existing room, we did not have a stud at the location of our wall. Once the wall is built it is lifted, aligning the wall with the pencil markings.Īt this time, we are ready to secure the studs to the existing wall. The wall is put together flat on the floor by placing nails through the header and footer pieces into each stud. Then cut studs to fit the heights of the wall. We then cut the header and footer pieces the length of the wall. Once the space is all cleared, you can begin framing out the utility closet.įirst, we marked the wall with a pencil line showing the location of the studs.
#Broom storage how to#
Not only did we create a storage area for the broom, mop and vacuum, but we also added shelves for even more organization. It’s week 4 of the One Room challenge and this week we’ll share how we increased the functionality of my laundry room by adding a small broom closet. It’s not the ideal place for storing cleaning equipment and supplies.
So when I started making plans to remodel my laundry room, I decided to add a small broom closet.įor years, I’ve had to keep my vacuum, sweeper, and mop in my pantry or coat closet. That’s exactly what my home was lacking, a utility or broom closet.
In fact, I remember my grandmother’s home having a small broom closet in her kitchen. Many older homes seem to have a broom closet. It seems to me that many newer homes are lacking storage for brooms, mops, vacuums and cleaning supplies. If you’re like me, you’re always looking for ideas to add organization and storage to your home.
0 kommentar(er)
